10HP Plastic Vacuum Forming Machinery Air-cooled Industrial Chiller

10HP Air cooled industrial Chiller for plastic vacuum forming machineryBS-10ASAbout the unitThe term "portable air-cooled chillers" refers to the basic configuration of the system, uses a single closed-loop design for the pressurized refrigerant. The term refers to any chiller system that contains all of the necessary

Featured Products

10HP Air Cooled Industrial Chiller for Plastic Vacuum Forming Machinery


10HP Air cooled industrial Chiller for plastic vacuum forming machinery

BS-10AS

About the unit

The term "portable air-cooled chillers" refers to the basic configuration of the system, uses a single closed-loop design for the pressurized refrigerant. The term refers to any chiller system that contains all of the necessary components - the refrigeration circuit, the reservoir, and the pump or pumps - within a single footprint.

The portable air-cooled chillers are used for controlled cooling of products, mechanisms, and factory machinery in a wide range of industries, including plastic injection and blow molding industry. The industrial chillers assist to improve production efficiency and minimize the rejection ratio of finished products.

Feature

  • Compressor: Adopt the Copeland / Danfoss / Panasonic scroll compressor.
  • Condenser: Adopt upper-blow cooler, double air blow the best cooling effect.
  • Evaporator: Adopt coil type / shell & tube / pleated exchanger type evaporator. High performance of evaporate completely the refrigerant for chilling water.
  • Pump: High-flow pump in smooth operation with minimum noise and no leakage.
  • Control system: Schneider or another famous brand Electric part. Adopt the PID control system which can be remote controlled and support to output the alarm message.
  • Outlook designing: Compact construction, low gravity, no leakage to keep manufacturing plant dry and clean.
  • High precision ±1°C controlled.

Available option

  • RS 485 communication function for remote control
  • PLC control system and touch screen
  • Indoor type / Stainless steel frame
  • Power supply : 220V / 380V / 415V / 460V, 50/60Hz

Function security

  • ON/OFF- Main power switch
  • Non-fuse circuit breaker
  • H/L switch
  • Power reverse phase protection switch
  • Anti-freezing protection
  • Compressor overload protection
  • Chilling water pump overload protection
  • Fan motor overload protection
  • Failure indicator system
  • Failure alarm system
  • Chilling water by-pass circuit
  • Multi-unit delay start control

Application

  • Plastic
  • Leaser
  • Chemical
  • Printing & Laminating
  • Machine tool
  • Laboratory
  • Industrial process
  • Packing
  • Food
  • Roll
  • Packing
  • Food
  • Rubber

Specification

Model  [BS- ***] Unit10AS
Refrigeration capacityKW25.2
×103kcal/hr21.7
Consumed powerKW10.3
Running AmpA20.7
CompressorNumberset1
PowerKW8.06
CurrentA16.3
RefrigeratingType R22
(Environmental friendly refrigerant R407C for option)
Control Mode External equalizer thermostatic expansion valve
PumpType High efficiency, low noise centrifugal pumps
PowerKW1.1
CurrentA2.2
Headm20
CondenserType High-efficiency internal thread finned type heat exchanger
Fan NumberSet2
Single Fan PowerKW0.55
Air Volumem³/h12000
EvaporatorWater Pipe DN40
Water Flow m³/h5
Tank VolumeL120
SizeDepthmm1600
Width mm850
Highmm1550
WeightKG350

Note:

  • The conditions: chilled water inlet temperature 12 ºC, the outlet temperature 7ºC, air temperature 35 ºC ;
  • Power Supply: 3PH-380V-50Hz, allowing voltage fluctuation ± 10%, Allow the voltage difference ± 2%.
  • The specification is subject to change due to product improvement without prior notice.

10HP Air Cooled Industrial Chiller for Plastic Vacuum Forming Machinery


10HP Air Cooled Industrial Chiller for Plastic Vacuum Forming Machinery

10HP Air Cooled Industrial Chiller for Plastic Vacuum Forming Machinery
10HP Air Cooled Industrial Chiller for Plastic Vacuum Forming Machinery
10HP Air Cooled Industrial Chiller for Plastic Vacuum Forming Machinery
10HP Air Cooled Industrial Chiller for Plastic Vacuum Forming Machinery

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours